TP-Link 8-Port Switch 10/100Mbps

The 8-Port 10/100Mbps Desktop Switch from TP-Link is a networking tool that's affordable and easy to use. This switch features eight Fast Ethernet ports for connecting computers or other Ethernet-enabled devices on your LAN network. In addition, this switch supports flow control, 10K jumbo frames, MAC address auto-learning and auto-aging, as well as Auto MDI/MDIX on all ports. It is packaged with material that is 80% recyclable and also features built-in energy-efficient technology so as to reduce power consumption when possible.

Innovative energy-efficient technology saves power up to 70% . As part of the energy-efficient technology, this switch automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network

Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode

Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput

Auto-MDI/MDIX eliminates the need for crossover cables

Supports MAC address auto-learning and auto-aging

Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps, and 1000Mbps hardware

Fan-less design ensures quiet operation

Desktop or wall-mounting design

Plug and Play design simplifies installation

 

 

Performance
Standards	IEEE 802.3 (10Base-T) IEEE 802.3u (100Base-TX) IEEE 802.3x
Protocols	CSMA/CD, TCP/IP
Ports	8x  RJ-45 for 10/100Mbps Ethernet ports with Auto MDI/MDIX
Maximum Forwarding Rate	10BASE-T: 14880pps/port 100BASE-TX: 148800pps/port
Bandwidth	Backbound: 1.6Gbps
MAC Address Table Size	1k
Speed	Transfer Rate Ethernet: 10Mbps (Half-duplex) Ethernet: 20Mbps (Full-duplex) Fast Ethernet: 100Mbps (Half-duplex) Fast Ethernet: 200Mbps (Full-duplex)
Transmission	Method: Store and Forward
Cables	Supported Cabling: 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ù STP (maximum 100m) 100Base-Tx: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ù STP (maximum 100m)
Advanced Features	MAC Address Auto-Learning and Auto-aging IEEE802.3x flow control for Full-Duplex Mode and backpressure for Half-Duplex Mode
LED	Power, Link/Act for all ports

General
System Requirements	Not specified by the manufacturer
Regulations (EMC)	FCC, CE, RoHs
Environmental Requirements	Operating Temperature: 32° to 104°F / 0° to 40°C Non-Operating Temperature: -40° to 158°F / -40° to 70°C Operating Humidity: 10% to 90% (non-condensing) Storage Humidity: 5% to 95% (Non-condensing)
Power Requirements	External Power Adapter: 100 to 240VAC, 50/60Hz
Base Dimensions (WxHxD)	5.5 x 3.4 x 1.1" / 14 x 8.7 x 2.8cm

Write a review